Common Plumbing Problems and How to Address Them
As a homeowner, it’s impossible to escape plumbing problems. And the worst part is that they happen when least expected and can cause a lot of inconveniences. Some prevalent plumbing issues include clogged toilets and drains, leaky pipes and faucets, low water pressure, and running toilets and water heater problems.
You may overlook the importance of a plumber until you encounter plumbing problems in your home. Note that if some of these problems are not addressed right away, they may cause a great disaster. But you don’t have to worry, just with a few clicks, you can access an emergency plumber in Bondi. Professional plumbers can help you fix the problem regardless of its intensity.
In the meantime, let’s look at common plumbing problems and how to address them, and when to contact a plumber near you.
Clogged Toilets and Drains
Clogged toilets and drains are not hard to detect because you’ll notice that water in your sinks or toilet isn’t flowing normally. Blocked toilets or drains can be such a nuisance and may endanger your health and that of your family if not taken care of.
But you can fix a problem with a bit of DIY skills. Alternatively, you can seek help from a professional plumber. In most cases, drains get clogged if something blocks them entirely or partially. For example, showers and sinks can get blocked if hair gets inside.
Other items like toys, shampoo lids could block the pipes. As for the toilets, anything that cannot dissolve in water can block the toilet once it’s flushed. You can prevent your sinks and showers from clogging by ensuring that no hair is left in the sink. Also, observe your kids, so they don’t put toys or other items in pipes. Moreover, in case anything that cannot dissolve in water falls in your toilet, avoid flushing it.
However, if the mistake is already made and your drains or toilet are clogged, you can try to unblock yourself. But if the clogs are frequent, it’s not a good idea to use acidic drain cleaners regularly as they may damage the pipes. In such a case, you should invite plumbers in Bondi to fix the situation. They have advanced skills and can prevent future jams without damaging the pipes.
Leaky Pipes and Faucets
Leaking pipes and faucets are so common. At first, dripping faucets may not look like a big problem, but they can be a nuisance. Also, the small drops of water could increase your water bill because a single drop per second amounts to over three thousand gallons per year. It’s easy to detect a leaking faucet as the water will be dripping physically from the tap, and you can hear the drops from afar.
A dripping faucet can happen once the tap seal gets damaged. It could tear, stiffen or dislodge. While the damage occurs, the seal will become loose and allow small amounts of water to leak. Also, the valve seat may corrode or wear. Pipes mostly leak at the joint, which could result from shifting, deterioration, and high water pressure, among others.
The easiest way of fixing leaky pipes and faucets is to replace the washer that causes the leak. Although that could be a DIY job, you may require special tools to replace the washer. Depending on the situation, replacing leaking pipes can be a complex task that needs professional attention. You should engage experts to avoid creating a bigger mess.
Water Heater Issues
Water heater issues are easily spotted because your shower will release cold water instead of warm water. You may also notice other problems such as dripping water, discolored water, puddles of water, and noise from your water heater, among other issues. You can troubleshoot some issues by yourself with basic skills, but others require a professional plumber Bondi due to their complexity. Moreover, professionals will mitigate the risks involved.
Water heater problems primarily result from leaks or not having adequate water. Other factors that trigger water issue problems are mineral deposits and sediments. The mineral deposits reduce water heater efficiency and therefore interfere with the hot water supply in your home. Sediment, on the other hand, may cause your water heater to have strange sounds.
You can avoid water heater issues by constantly checking the pressure valve often. Also, you can remove the sediment by flushing the tank occasionally. You should keep checking your tank to check for leaks and drips that could trigger greater issues. For water heater problems that require a simple fix, you can handle that by yourself. But it’s always advisable to hire a professional plumber to fix your water heater problems as water heaters can be risky.
Leave a Reply