Plumber Bondi Logo

0402 290 290

  • HOME
  • BLOCKED DRAINS
  • HOT WATER
  • EMERGENCY PLUMBING
  • PIPE RELINING
×
  • HOME
  • BLOCKED DRAINS
  • HOT WATER
  • EMERGENCY PLUMBING
  • PIPE RELINING

The Process of Cured-In-Place Pipe (CIPP) Lining made easy

What’s the whole story of Cured-In Pipe (CIPP)?

CIPP is only one of the few applications for the rehabilitation of the trenchless pipe. As with most pipeline lining parts, the entire CIPP process is about connecting a resin liner to the old or host pipes so that the structure of the sewer pipeline can be strengthened. It has been and continues to be a well known process in pipe repair.

What is the way to do this?

The condition of your pipes must first be understood by plumbers and tube reparation contractors. You see, it can be more convenient, less complicated and more cost-efficient for CIPP and other piping relaying methods, but it’s not always appropriate for those piping repair applications. Once the pipe is assessed, you can inform the property owner whether or not CIPP is done. In the event that the pipe repair team goes to the recessing pipes, the following steps are most likely used.

  1. Remove obstacles within the sewer line

The sewer tubes which need to be repaired for any type of tubing are clearly blocked and blocked by their sewer systems, which is why clearing the pipeline is the first step in the CIPP process. The impediments found vary between roots, soil, mud, oils, fats and even the structure of pipes collapsing. Many instruments can be used to remove these blockages, for instance hydro jets, mechanical cutting instruments, augurs and much else. The tools used depend on the situation, however.

2. Measures 

With the obstacles gone, the pipeline can now be measured accurately by the contractors. Measure the length and diameter of the tube because the contractor modeled the new tube line to the measurements. They can create a liner that fits the sewage line perfectly. The resin is also mixed with the liner during this process. This resin liner serves as the system’s new and key pipe.

3. Presentation of the resin sheet

Before it is inside the wastewater system, the resin liner is placed in a bladder. It can help in positioning the liner, which makes this bladder an important tool. Once this bladder is in place, it is then inflated so the resin liner can bind to the old and damaged pipe. Depending on how much the system has to be fixed, the resin liner is then left to be healed (härtened basically) for a few hours.

4. End of inspection

The bladder is finally removed and a final inspection is carried out if the pipes are ultimately healed. Another important step is the examination of the newly curated pipes, because they can confirm that the liner curing and positioning is perfectly performed. Naturally, some adjustments must be made if there are any errors.

Filed Under: blog, Pipe Relining

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Book a Job

Or Request For Expert Advice
This field is for validation purposes and should be left unchanged.
bondi logo large

Bondi NSW 2026 Australia

Phone : 0402 290 290
Email : i[email protected]

QUICK LINKS

  • Home
  • About Us
  • Testimonials
  • CONTACT US

SERVICES

  • BLOCKED DRAINS
  • HOT WATER
  • EMERGENCY PLUMBING
  • PIPE RELINING

GOT A QUESTION?

© Copyright 2023 Plumbing Service. All Rights Reserved.

Terms & Condition | Privacy Policy

Designed & Developed by: plumber bondi