4 Things to Try if Your Gas Water Heater Isn’t Working

There are many different types of water heaters on the market, each with its unique set of characteristics and features that cause them to run and require different maintenance procedures. Apart from that, each of them has their own set of problems. They, like your gas water heater, are prone to malfunctioning from time to time. As a result, it must be addressed and corrected as soon as possible in order to avoid further system problems. The most common problem with a gas water heater is that it constantly fails to heat the domestic water. When the temperature drops below zero, this is a common occurrence. Here are some resources to assist you in resolving this issue. The domestic water is not heated by the gas water heater. There are numerous variables that lead to the emergence of the difficulty when your water heater does not heat the home, and here are some of them:

• Make sure the water heater’s gas is turned on.

The loss of electricity is usually the primary cause of a mechanism’s failure to operate. In this situation, the gas that powers the device aids its operation. First, try switching the gas knob to pilot mode to prevent the burner from lighting and causing a gas leak while you check the unit’s condition. Then, remove the metal cover from the bottom of the device and check to see if the pilot light and the burner are both lighted.

• The heater’s pilot light has gone out.

Some water heaters feature instructions on the tank that must be followed in order to avoid future issues. When the gas inlet valve can be partially shut off, this condition may arise. Before relighting the pilot, make sure the handle is parallel to the line and turned completely on. If the pilot still won’t light after you’ve done all of this, it’s merely a sign that the thermocouple may be malfunctioning. To avoid fully blowing out the system, it’s advisable to hire a professional plumber.

• The Burner Isn’t Turned On

If the burner is not turned on, try changing the cover and making sure the thermostat is set to a safe temperature of 120 to 130 degrees Fahrenheit. Whether it doesn’t work, try turning on your hot tap and waiting a few minutes to see if hot water has already been generated.

• The smell of gas penetrates the area.

If the system smells like gas, check your water heater straight away and turn the gas valve off right away to stop the flow of gas. There could be a gas leak someplace, and if you don’t flip the valve quickly enough, it could spark a neighboring fire, resulting in an explosion.